Econ FP Meter System

Proportional injection with water meter activated system

Meter System includes Econ FP Pump and Water Meter

If looking for a flow activated metering system for light duty water well applications, the Econ FP Meter System may be the answer. Treating water proportionally to the system flow rate is often a preferred method for disinfection, pH control, oxidation and more.

The Econ FP Meter System includes the Econ FP pump and a dry contact water meter. The system is shipped from the factory with the components pre-mounted on a heavy duty wall mountable panel.  The 3/4″ or 1″ plastic water meter is offered as 1, 2, 4 or 10 pulses per gallon and is certified with IAPMO to ANSI/NSF 372, low lead.

Additional features include a junction box for organized wires and a flow indicator for verifying the solution is pumping. Like all Stenner peristaltic metering pumps the Econ FP is self-priming with no loss of prime due to gaseous solutions.

Build an Econ FP Meter System Item Number

To build an Econ FP Meter System Item Number, click here.  Select the Econ FP pump, the pump parameters and the meter system option.  If you would like assistance, Contact us, we are ready to help.

How the Econ FP Pump Works

When installing the Econ FP Meter System; select the mode displayed as SECONDS on the digital control pad. The pump accepts a dry contact signal from the water meter and the pump runs for a set amount of time for each signal received.

There are five operating time ranges displayed, the maximum pump operating time is adjustable from 10% to 100%.
1 SECOND = 0.1 to 1.0
5 SECONDS = 0.5 to 5.0
10 SECONDS = 1.0 to 10.0
20 SECONDS = 2.0 to 20.0
60 SECONDS = 6.0 to 60.0