Econ Integrator™ Meter System
Pulse water meter activated injection system includes pump with signal repeater relay
Convenient Injection System for Water Treatment on the Farm
Quality water is proven to improve livestock and poultry production and health and it is vital for the maintenance of the water supply equipment. The Econ Integrator™ Meter System can inject common undiluted chemicals directly into the water line without harm to the pump for all the farm’s water treatment needs.
- Water and water line disinfection, pH adjustment and oxidation.
- Injection of nutrients and supplements into water lines.
- Injection of polyphosphate solutions for corrosion and scale control on plumbing fixtures.
The meter system includes the Econ Integrator™ pump and a dry contact pulse water meter pre-mounted to a heavy duty wall mountable panel. The pump runs on electricity and is activated by the pulse rate of the water meter to accurately inject a fixed amount of chemical per volume of water.
Select a 3/4″ or 1″ plastic water meter with a choice of contact rates 1, 2, 4 or 10 pulses per gallon. A flow indicator is installed on the discharge line to confirm the solution is pumping. The junction box keeps wires neatly contained.
Utilize One Meter for the Pump and the House Controller
If an existing water meter is utilized to tally water consumption, an additional meter dedicated to chemical feed is not required. The pump’s built-in repeater relay repeats the signal from the meter to the house controller to register water consumption. The pump can accurately inject or be placed in standby without interrupting the water meter signal.
Econ Integrator™ Pump Features
The pump operating times are digitally adjusted from 0.1 to 60 seconds in 1% increments. The chemicals injected are contained in the peristaltic pump tube and in the suction and discharge lines so they do not touch the moving parts in the pump. The Integrator™ is equipped with a safety lockout feature and a standby mode. The standby mode allows tube replacement in the pump head without disconnecting the power and/or the lead wires. Like all Stenner peristaltic metering pumps, the Econ Integrator™ is self-priming and doesn’t lose prime due to off-gassing solutions.
Build an Econ Integrator™ Meter System Item Number
To build an Econ Integrator™ Meter System item number, click here for the build an item number page. First, select the Econ Integrator pump, then select the pump parameters and the meter system option.
Contact us for assistance, we are ready to help.
