S3P02AA201N
The S10P Series is a peristaltic metering pump activated by a water meter, control valve, flow switch or any control equipment that responds to water flow. The control equipment is wired to the pump input terminals to accept a dry contact or 12-24 VAC/VDC signal. The pump runs at a set time, a set speed or a set flow rate output according to the mode of operation selected. The flow rate outputs are up to 30 gallons per day at 100 psi maximum.
The control panel displays one of four operating modes, Seconds, Flow Switch, Auxiliary or 10 PPG and the percent setting for each. The functions are easy to program on the six-button control pad with a backlit LCD window. Two buttons are required for operation and the keypad will automatically lock if it remains idle for one minute.
When using the 10 PPG mode with a 10 PPG water meter, chemical is dispensed ten times per gallon for steady distribution. Also with the 10 PPG mode, the mixing tank* can be eliminated for applications not requiring contact time.
Highlights
- Activated by dry contact or 12-24 VAC/VDC signal
- Totally enclosed housing
- Leak detection
- Signal repeater
- Tube replacement without tools
- 2 year warranty
Agency Listings
Pump Dimensions
Box Dimensions
14 x 9 x 10 in. (35 x 23 x 24 cm)
Shipping Weight
9 lbs (3.7 kg)