S4M8XAA3011
1:128 Pump Adjusts to System Flow Rate for Even Distribution of Product
Activated by a dry contact pulse water meter, the S128 automatically injects solution into the water line proportional to the system water flow at a ratio of 1 ounce of solution to 128 ounces of process water. As the pump registers dry contacts, it delivers the precise ratio.
The pump has three speeds to automatically adjust the injection rate when the water system flow rate increases or decreases. This flow response design allows the pump to evenly and proportionally inject solutions especially at low flow rates.
The S128 and the low flow VPD water meter are ideal for early stage poultry flocks and swine nurseries when water flow is minimal. The S128 can inject undiluted chemicals directly into the water line eliminating water restriction and the daily mixing of stock solutions. In addition, the pump is unaffected by poor water quality.
Highlights
- Evenly injects especially at low flows
- Activate multiple pumps with one meter
- Leak detection and optional relay
- LED indicators
- Totally enclosed housing
- Simple tube replacement
- Potentiometer: Prime, 1 PPG, 1 PPL, 10 PPG, Reset Tube Timer, Standby
- Output Relays: Signal Repeater Leak Detect, Drive Fault, Low Level
- LED Indicators: Leak/Fault, Overrun, Change/Level, Power/Standby
- Clear cover on control panel for moisture protection
- Enclosed housing with NEMA 4X rating
- 2 year warranty
Agency Listings
Pump Dimensions
Box Dimensions
14 x 9 x 10 in. (35 x 23 x 24 cm)
Shipping Weight
10 lbs (4.5 kg)